HARD ANODIZED ALUMINUM WASHERS (SET OF 6 ) Swap out washers to customize your holster! Each washer is machined from billet aluminum and finished with a hard anodized coating for maximum durability.

Canik Mete MC9 Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Canik Mete MC9

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This listing is only for a Canik Mete MC9 Holster

Canik TTI Combat - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Canik TTI Combat

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This holster will fit the following models only: Canik TTI Combat

Holster Wedge Kit - Appendix Carry Holsters

The Radial foam concealment wedges are designed to place your holster even closer to your body for maximum concealment. This IWB holster wedge is the ultimate concealed carry partner.

• Maximize comfort and concealment

• Works on most IWB Holsters

• Purchase includes four wedges of the same size

• Dimensions:

- Large - 1.0 x 4.00 x 1.00

- Medium - 1.0 x 3.00 x 0.75

- Small - 1.00 x 3.00 x 0.50

 

CZ P-10 C Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

•  Fits the following models: CZ P-10 C

•  Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This listing is only for a CZ P-10C Holster

CZ Shadow 2 Carry Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: CZ Shadow 2 Carry

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This listing is only for a CZ Shadow 2 Carry Holster

CZ Shadow 2 Compact Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: CZ Shadow 2 Compact

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This listing is only for a CZ Shadow 2 Compact Holster

Give them the gift they really want and let them choose their holster model and color. This gift card will be sent via email.

FN 509 Tactical Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: FN 509 Tactical

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This listing is only for a FN 509 Tactical Holster

Glock 17 / 31 (Gen 2-5), Glock 22 (Gen 2-4) Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following modules: Glock 17 / 31 (Gen 2-5), Glock 22 (Gen 2-4).

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This holster will fit the following models only: Glock 17 (Gen 2), Glock 17 (Gen 3), Glock 17 (Gen 4), Glock 17 (Gen 5), Glock 31 (Gen 2), Glock 31 (Gen 3), Glock 31 (Gen 4), Glock 31 (Gen 5), Glock 22 (Gen 2), Glock 22 (Gen 3), Glock 22 (Gen 4)

Glock 19 (Gen 2-5) Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Glock 19 (Gen 2-5)

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This holster will fit the following models only: Glock 19 (Gen 2), Glock 19 (Gen 3), Glock 19 (Gen 4), Glock 19 (Gen 5)

Glock 19x (Gen 2-5) Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Glock 19x (Gen 2-5)

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This holster will fit the following models only: Glock 19x (Gen 2), Glock 19x (Gen 3), Glock 19x (Gen 4), Glock 19x (Gen 5)

Glock 23 (Gen 2-4) Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Glock 23 (Gen 2-4)

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This holster will fit the following models only: Glock 23 (Gen 2), Glock 23 (Gen 3), Glock 23 (Gen 4)

Glock 26 (Gen 2-5), Glock 27 (Gen 2-4) Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Glock 26 (Gen 2-5), Glock 27 (Gen 2-4). Does NOT fit Glock 27 (Gen 5)

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This holster will fit the following models only: Glock 26, Glock 26 (Gen 2), Glock 26 (Gen 3), Glock 26 (Gen 4), Glock 26 (Gen 5), Glock 27 (Gen 2), Glock 27 (Gen 3), Glock 27 (Gen 4)

Glock 32 (Gen 2-5) - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Glock 32 (Gen 2-5)

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This holster will fit the following models only: Glock 32 (Gen 2), Glock 32 (Gen 3), Glock 32 (Gen 4), Glock 32 (Gen 5)

Glock 43 Holster - Quality, Comfort and Concealment.

This Radial Coreflex is built specifically for the Glock 43 appendix carry holster (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following model: Glock 43

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This listing is only for a Glock 43 holster

Glock 43x (no rail) Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Glock 43x (without rail). Does NOT fit Glock 43x MOS (with rail)

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This listing is only for: Glock 43x Holster

Glock 43x MOS Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Glock 43x MOS (with rail). Does NOT fit Glock 43x (without rail)

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This listing is only for: Glock 43x MOS holster

Glock 45 (Gen 2-5) Holster - Quality, Comfort and Concealment.

The Radial Coreflex Holster is built specifically for appendix carry (AIWB). We've carefully selected and tested each component to provide the maximum versatility, comfort, and concealment for the end user.

• Fits the following models: Glock 45 (Gen 2-5)

• Fully-adjustable concealment claw works in tandem with the shock cord connection to pull the grip of your handgun tighter against your body to eliminate obvious printing.

• Military-grade shock cord delivers increased comfort and concealment by allowing the holster to move with you and flex tight against the contour of your body.

• Ultra-slim profile and carefully cut angles to reduce pinching / jabbing. 

• Suppressor height sight and optic ready. No additional modifications needed to accommodate these accessories.

• Multiple adjustment settings for cant (angle) and ride height in order to accommodate different body types and carry preferences.

• Dual pocket clips secure your firearm on your waistline, providing a consistent purchase point every time.

• Adjustable retention for firearm and spare magazine, allowing you to dial in your preferred retention for the quickest draw.

• The spare magazine side of the holster has a slightly canted angle to allow for a quicker and more natural access.

• The spare magazine carrier features a built in concealment structure on the face of magazine designed to pull the spare magazine tighter into the body to eliminate printing.

• Reinforcement ridges are strategically placed throughout the holsters design, effectively preventing your holster from stress fracturing or breaking with extended use. 

• This Appendix Holster has an open ended design to allow for threaded barrels and comps (as long as they aren't wider than the exterior dimensions of the slide).

• All of our holsters are covered by a lifetime, no B.S. warranty. This means that if your holster breaks we will replace it NO MATTER WHAT.

*This holster will fit the following models only: Glock 45 (Gen 2), Glock 45 (Gen 3), Glock 45 (Gen 4), Glock 45 (Gen 5)